Terms
Terms of Purchase
Xtrued, LLC · Lehi, Utah · Effective date: October 29, 2026
These Terms of Purchase (the "Terms") form the agreement between Xtrued, LLC ("Xtrued," "we," "us") and the person or organization placing an order ("Customer," "you") for custom 3D printing, short-run production, 3D scanning, reverse engineering, CAD, 3D printer repair, and related services and parts (the "Work"). If you order for an organization, you confirm you are authorized to bind it to these Terms.
1. Contract Formation and Precedence
These Terms apply to every quote, order, and job Xtrued accepts. Approving a quote, placing an order, or paying for Work means you accept these Terms. If a purchase order or other document from you contains different or additional terms, these Terms control, and those terms are rejected unless an authorized Xtrued representative agrees to each one specifically in writing.
2. Quotes
Quotes are valid for 30 days from the date issued unless the quote states otherwise. Each quote is based on the files, quantities, materials, settings, and specifications you provide at the time of quoting. Any change to files, quantities, materials, settings, tolerances, finish, or timing may require a new quote, and Xtrued is not bound by the earlier price for changed Work.
3. Order Acceptance and Deposit
An order is accepted when Xtrued confirms it in writing (email is sufficient). Xtrued may require a deposit of 50% of the order total before scheduling Work, and may decline any order at its discretion. Production time is not reserved until any required deposit is received.
4. Payment and Taxes
Xtrued issues invoices through Wave. Invoices may be paid by card or bank transfer; bank transfer details are provided securely on request. Unless otherwise agreed in writing, payment is due on receipt of the invoice or at pickup, whichever comes first, and parts are released once paid in full. Prices exclude applicable sales, use, and similar taxes, which are added to the invoice where required. Shipping, packaging, and carrier charges are billed to you unless the quote says otherwise.
5. Lead Time and Force Majeure
Lead time is quoted per job based on part size and print requirements. Lead times and completion dates are good-faith estimates, not guarantees, and begin once the order is accepted and any deposit is received. Rush service is available on request and may carry an additional charge. Xtrued is not liable for delay or failure caused by events beyond its reasonable control, including equipment failure, power or utility outages, material or supply shortages, carrier delays, fire, flood, severe weather, labor disputes, government action, or acts of God.
6. Pickup and Delivery
Pickup is by appointment at Xtrued's Lehi, Utah location. Shipping can be arranged on request at your expense. Title and risk of loss pass to you when you (or your agent) pick up the parts, or when Xtrued hands the parts to the carrier, whichever applies. Xtrued is not responsible for loss or damage in transit; carrier insurance is available on request at your cost. Parts not collected within a reasonable time after notice that they are ready may be subject to storage charges or disposal after written notice.
7. Cancellation and Changes
You may cancel or change an order by written notice. If Work has started, you will be charged for materials consumed, machine time used, design or setup time performed, and any non-cancellable costs incurred up to the time Xtrued receives the notice. Completed parts remain payable in full.
8. Customer Files and Intellectual Property
You keep ownership of the files, designs, and data you provide. You represent and warrant that you own or have all rights needed to provide those files and to have them scanned, modeled, reproduced, or manufactured, and that doing so does not infringe any patent, copyright, trademark, trade secret, or other right of any third party. You will defend, indemnify, and hold harmless Xtrued and its owners and personnel from any claims, losses, and costs (including reasonable attorneys' fees) arising from your files, designs, specifications, or your use of the parts. Xtrued keeps your files and information confidential, uses them only to quote and perform your Work, and shares them only as needed under Section 14. Xtrued's own processes, settings, tooling, and know-how remain Xtrued's property. Ownership of CAD models created by Xtrued is as stated in the quote; if not stated, the deliverable files transfer to you on full payment.
9. Tolerances and Fit
Additive manufacturing produces normal variation in dimensions, surface finish, layer lines, color, and strength, which depends on geometry, material, orientation, and process. Unless critical dimensions, tolerances, or fits are stated in writing on the accepted quote, parts are produced to Xtrued's standard practices and are considered conforming within normal print variation. Xtrued does not modify or scale your files unless you request it.
10. 3D Scanning and CAD Services
Scan accuracy. The accuracy of 3D scan data depends on the part's surface, size, finish, and condition. Any accuracy or tolerance applies only if it is stated in the accepted quote; otherwise, scan data is provided as captured.
No revisions. No revisions are included. Scanning, reverse engineering, and CAD deliverables are produced to the approved quote and specifications, and any changes requested after approval are quoted as new Work.
Digital deliverables. Scan data, STL, STEP, and CAD files are subject to the same ten (10) calendar day inspection period in Section 13, measured from delivery of the files. For a valid non-conformity with the accepted quote, your sole remedy is correction of the file.
Reverse engineering. Models reconstructed from worn, damaged, or incomplete parts are Xtrued's best reconstruction and are not a guaranteed match to the original design. You must verify fit and function before using any model for production.
Customer-supplied parts. Original parts you leave with Xtrued for scanning are held at your risk and must be picked up in accordance with the uncollected-parts terms in Section 6. Xtrued is not liable for marks or effects from normal handling or scanning preparation, such as the application of scanning spray.
11. 3D Printer Repair Services
Diagnosis and estimate. Diagnosis is billed at the rate stated in the quote. After diagnosis, Xtrued will provide a repair estimate, and no repair work will begin until you approve it.
Parts and labor. Replacement parts and labor are billed as quoted. Replaced parts are discarded unless you ask for them back before the repair is completed.
Scope of repair. A repair covers only the issue you reported and approved. It is not a warranty of the whole machine or of any other component. Xtrued may decline any machine it considers unsafe or not economical to repair.
Your data and materials. Before drop-off, you are responsible for backing up any data, firmware, profiles, and settings, and for removing your filament and other materials. Xtrued is not responsible for loss of data, settings, or materials.
Uncollected printers. Printers not collected within 30 days after notice that the repair is complete may be charged storage or treated as abandoned, to the extent permitted by Utah law.
Repair claims. Claims concerning repair workmanship must be made in writing within ten (10) calendar days after pickup or delivery of the printer, otherwise the repair is deemed accepted. For a valid claim, Xtrued will, at its option, re-repair the reported issue or refund the repair charges paid; this is your sole and exclusive remedy. Replacement parts are provided without warranty of any kind, and no manufacturer warranty is passed through to you.
Manufacturer warranty. A repair may affect the manufacturer's warranty on your printer, and you accept that risk when you approve the repair.
12. Functional Suitability and Safety-Critical Use
You are solely responsible for determining whether parts are suitable for your intended use, including testing for fit, strength, temperature, chemical exposure, and durability before relying on them. Parts are not to be used in safety-critical, life-support, medical, aerospace flight-critical, load-bearing lifting, or similar applications where failure could cause injury, death, or major property damage, unless Xtrued has specifically agreed to that use in a signed writing.
13. Inspection and Claims
Please inspect parts at pickup or on delivery. Claims for defects or non-conformance with the accepted quote must be made in writing, with photos and a description, within ten (10) calendar days after pickup or delivery; otherwise the parts are deemed accepted. For a valid claim, Xtrued will, at its option, reprint the non-conforming parts or refund the price paid for them. This is your sole and exclusive remedy. Xtrued may ask that the parts be returned for evaluation.
14. Process Variation
Lead times, material properties, and tolerances vary by process and are stated on your quote. Section 5 applies to delays. Your files are shared only as needed to complete the Work.
15. Warranty Disclaimer
Except for the remedy in Section 13, all Work and parts are provided "as is." To the fullest extent permitted by law, Xtrued disclaims all other warranties, express, implied, or statutory, including the implied warranties of merchantability, fitness for a particular purpose, title, and non-infringement. No employee or agent may make any other warranty on Xtrued's behalf.
16. Limitation of Liability
To the fullest extent permitted by law, Xtrued will not be liable for any indirect, incidental, special, consequential, exemplary, or punitive damages, or for lost profits, revenue, production, data, or business, however caused and even if advised of their possibility. Xtrued's total liability arising from or related to any order will not exceed the price paid or payable for that order, even if an exclusive remedy fails of its essential purpose.
17. Governing Law and Venue
These Terms are governed by the laws of the State of Utah, without regard to its conflict-of-laws rules; the U.N. Convention on Contracts for the International Sale of Goods does not apply. Any dispute will be brought exclusively in the state or federal courts located in Utah County, Utah, and both parties consent to that jurisdiction and venue. The prevailing party in any action to enforce these Terms may recover its reasonable costs and attorneys' fees.
18. General
You may not assign an order without Xtrued's written consent. A failure or delay in enforcing any provision is not a waiver. If any provision is found unenforceable, it will be limited to the minimum extent necessary and the rest remains in effect. Amendments and waivers must be in writing. These Terms, together with the accepted quote, are the entire agreement for the Work and replace any prior discussions. Xtrued may update these Terms for future orders; the version in effect when an order is accepted applies to that order.
19. Contact
Xtrued, LLC · Lehi, Utah · (385) 336-3553 · quotes@xtrued.com · support@xtrued.com · www.xtrued.com
Xtrued, LLC · Terms of Purchase · Effective date: October 29, 2026