Instant quote

Services

3D printing, scanning, CAD, and production runs

Xtrued, LLC. Lehi since 2017. Prototype a part, test it, then order it in quantity.

3D printing3D scanningCAD modelingShort-run productionHigh-volume

Short-Run Production

10–100 of the same part after the printed prototype is approved.

FDM and resin 3D printed jigs and housings

Additive

3D printing

FDM, resin, MJF PA12, and metal, from a first article to a volume order.

  • $30 print minimum.
  • FDM: PLA, PETG, ABS, ASA, ASA-GF, TPU, and nylon PPA-CF. Resin: ABS-like, frost clear, full clear, rubber-like, and high-temperature.
  • MJF: PA12 natural, PA12 black, and glass-bead reinforced. Metal: 316L, 17-4PH, 18Ni300, AlSi10Mg, Ti6Al4V, CuCrZr, Inconel 718, and CoCrMoW.
  • Multi-color FDM is available by email quote.
  • Large parts are welcome. Send the size.
3D printing details

Capture

3D scanning

Need to reverse-engineer a part that has no drawing? We scan it, clean the mesh, and deliver the file, or take it straight to a prototype.

  • $175/hour, 1-hour minimum.
  • Deliverables: STL, OBJ, PLY, 3MF.
  • Volumetric accuracy 0.04 mm + 0.06 mm/m. Resolution down to 0.05 mm.
  • 5MP full-color texture when you need it.
  • Blue laser and infrared scanning handles dark and reflective parts, with no markers needed.
  • Example on this page: a worn spur gear scanned, rebuilt as CAD, and checked against the mesh (±0.5 mm).
  • The display mesh on this page is reduced for web viewing. Files are provided in full resolution.
3D scanning details
Scan-to-CAD comparison of a worn spur gear, ±0.5 mm
Scan vs CAD

±0.5 mm

CAD modeling from a sketch or sample

Design

CAD modeling

A napkin sketch, a photo, or a sample on the counter is enough to start. We model for manufacture, not just for a pretty render.

  • 3D and 2D from a sketch, picture, or physical sample.
  • Modeled for the prototype and for later volume orders.
  • You get files you can print yourself or use for a volume run.
  • No CAD yet? Generate a starting STL from a text description, then we can refine it.
  • Every job is different, so we quote after a short conversation.
CAD modeling details
A short production run of identical parts from Xtrued

Then volume

Short-run production

Test the prototype, then order a short run of the same part. How we produce the volume lot is our job — you get parts that match the approved sample.

  • Typical lots of 10–100 pieces.
  • Starts from a 3D-printed prototype you have already tested.
  • Same geometry as the signed-off part.
  • Quoted after the prototype is approved. Not in Instant quote.
Short-run details
High-volume identical parts after a 3D-printed prototype

Scale

High-volume production

When the prototype is proven, we can supply hundreds of the same part. One point of contact from the first article through ongoing supply.

  • Lots of 100+ pieces.
  • Volume starts after you sign off the 3D-printed prototype.
  • Repeat orders from a frozen revision.
  • Email the file and quantity for a volume quote. Instant quote covers prototypes only.
High-volume details

Have a print file?

Instant quote on STL, OBJ, 3MF, and STEP. For SolidWorks files, use the contact form.

Instant quoteContact